rtx 3090 undervolt mining

I choose first to set the voltage to 825 mV. It's easy! My chip is just normal, I think most 3090 can do it. Okay, it seems you have a higher tolerance for fan noise than me (yeah, I know, that is very subjective, depends on personal preferences, case, case location, etc). Is there a simple answer to the question 7900XTX or 4080? I dont want fans at 100% and memory junction temperature 104 or lower is a must. I would like to achieve lower temperatures so I don't have to put up with this loud noise until I install the custom loop. sasume But still, 1791 wasn't even stable on ~820mV. Build is R7 5700x (stock settings) + 3070 aorus master + 16GB 3200mhz on a B450 msi carbon ac wifi. RTX 3080 Undervolt 0.85v @ 1920mhz Results | TechPowerUp Forums Believe it or not, today I got my hands on a 3090 FTW3 Ultra and I gotta say I'm disappointed. Started 55 minutes ago Mike twphotography 2 yr. ago The RTX 3090 Ti provides 66 Mh/s hashrate on RVN with a power consumption of 446 watts. GPU core temp sitting at around 80C, memory 90C, hotspot 100C. Welcome to TechPowerUp Forums, Guest! This is rock stable and knocks about 70W power and 5C temp off stock settings, as well as giving me about 75MHz increase in core GPU speed, so a win all round. Hard pressed to hit 60c and 270w draw. I also noticed that by default the card sets the target temperature internally to be 70C despite a temperature threshold being set in MSI Afterburner. Feels like golden sample. What you want to do is choose a lower voltage than the one you saw in GPU-Z and then set the frequency to the value you saw when running GPU-Z earlier. If this is the case then Im going to do more testing. I used 2560x1440p and Pro(highest) settings, and got an average of 35.28 FPS. Press J to jump to the feed. For reference [ here is my system: These fans are running at 1000w-1200w . RTX 3090 TUF OC -> PowerTarget - best performance with undervolting Interesting that you say it doesnt affect performance by as little as 2-4 FPS. Have a dual purpose Gaming/VR/Mining rig, first time trying mining and optimizing a card. Started 48 minutes ago But after seeing Optimum Tech being able to hit 1800MHz with 806mV and 1850MHz with 850mV, I'm wondering if anyone else is able to hit those undervolts aswell? It has more CUDA cores, which means it can handle more complex algorithms. I recently purchased a Palit RTX 3090 GamingPro which is running very hot and the fans are maxed out. Summarized here again: 1750Mhz in the Curve-Editor result in real 1785Mhz after the heating phase (think of the offset I already described by the P-States!) What I and I'm sure many noticed is that it is all. Editor-in-chief and name-giver of igor'sLAB as the content successor of Tom's Hardware Germany, whose license was returned in June 2019 in order to better meet the qualitative demands of web content and challenges of new media such as YouTube with its own channel. I just started doing this also ichill 3090x3 gets so bloody loud temps hit 74c and that's with fps locked @ 85fps @ 3440x1440 i dropped it -200 and set it 1755mhz and it very quiet temps 56-64c and get same fps. 96fps 3440 x 1440p. I believe it was called tiled rendering. Need to check on the weekend. The reason my card does better undervolted than stock (I get 12700 or so stock I think) is that lower voltage means less power meaning it can do more with the 400W it is allowed to play with. Silicon varies but so does the program you're stress testing the undervolt with. I'll keep it running in the background(windowed) doing loops with the highest possible graphics settings + the highest possible custom resolution. Posted in New Builds and Planning, By You need to undervolt your GPU to minimize its power consumption and keep it under 80 Watts. When it arrives i will be particularly interested to find out how it performs next to the TUF version. Temp is not quite accurate because I run the benchmark from idle. rodilool Does it matter where you start from, like how much you bring the slider down before selecting your mV/freq? Wauw, yeah, that doesn't sound good at all with the FTW3 I think my card is slightly above average? It is stable. It is called undervolting. happy to compare results too. I mainly wanna undervolt because I want my PC to be quiet with good temps but also because the 3090 is very power hungry. Lock the voltage and frequency with the key : L. Then switch to the regular Afterburner-window and click APPLY. This is an incredibly powerful card, and a great miner to boot. Link:Pure RayTracing benchmark by MARvizer (itch.io) This is probably why my score is higher than yours. LTT bilibili channel hits a million subs. Tags Overclocking RTX 3080 RTX 3090 Undervolting, Introduction The prices for computer memory have dropped significantly over the last few months for . Well, 50 watts does kinda makes sense with only 0.7mV You will not achieve this by lowering the power limit or only with very bad values. I noticed the extra power connector on the strix version and decided to get that instead. I wonder why people like to talk crap GPU-Z is a lightweight utility designed to give you all information about your video card and GPU. So do you slide your power slider all the way up then, when set your curve to 1890@850? ASUS Maximus XI Extreme: Z390 with all the things! I think most of us are pretty familiar with the concept of overclocking. You're damn lucky IMO. When it came up, it immediately gave an advantage to Nvidia because the memory didn't have to suffer the full brunt unless the gpu needed it a hundred percent. A place for everything NVIDIA, come talk about news, drivers, rumors, GPUs, the industry, show-off your build and more. Thanks. It might be even better or need a bit higher voltage. There are three GPU fans and two of them are grouped into one so you can see they are running at roughly 3500RPM. All Rights Reserved. I saw many people to change rtx 3090s 4x but gained silicon lottery on same volts 30-45mhz yeah not good. So I increased it to the 137% in Afterburner and that kept GPU clock on 1815MHz but total board power increased from 334 watts to 380-ish watts. In some scenarios that generate very little load, the card remains below the 330 watt limit, especially in lower resolutions. This was the early finding of common crashes and what the vBIOS updates were to fix. Keeping my fingers crossed. Has anyone played quake 2 rtx on FE 3080. Which is "good" but I might need to tweak it to be better since I primarily game in VR. Motherboard tier list (AMD) PSU tier list SSD tier list. Im willing to drop lower and save more power/heat if this is the case though. 3DMark: I used the stresstest feature to test my settings, Bright Memory: Infinite Ray Tracing Benchmark from Steam: this was also used to test the stability of my settings. So I kept 1755mhz 0.8v with 1050mhz x2 overclocked memory to 21.6ghz . It's easy! https://www.guru3d.com/articles_pages/palit_geforce_rtx_3090_gamingpro_oc_review,1.html, Why does my 7900xtx run below expectations. Good to hear it's similar. The actual values can differ between cards. Earn Bitcoin by connecting your PC and trade over 60 coins on our exchange. Use minerstat and start mining with your Nvidia RTX 3090. In the end you should set the volate to a value, test it with stress test-software, if it works possibly lower it a bit more and so on. Is there a simple answer to the question 7900XTX or 4080? I thought I knew what was normal. My results are very similar to you. I've tested undervolting extensively on my 3090fe using the afterburner custom curve method (look on YouTube, a few good guides around). For our usage cases, we are trying to find a presetwhere power draw is significantly less as well as the noise that comes from the GPU's fans. Just recently bumped into this thread and I totally agree that Optimum Tech's results seem to be good only for light rasterization workloads. here are several tests with Shadow of the Tomb Raider Benchmark: Can you confirm the settings you've used? Posted in General Discussion, By How can I UNDERVOLT a GPU (RTX 3070) below 700mv? Remember that you take full responsibility when messing with your card. :oops: yeah, haha, but it's not working properly. Sorry that it seems like I want to try and find the "Whyit isn't true". Some also say that the cooler also keeps the VRAM cooler (which causes the GPU to run a tad hotter), but I see the same overall 94C for the VRAM too. Ideally the power scales with the square of the voltage. Apply the curve using the apply button on the main afterburner window. I have99.5% frame rate stability with my current undervolt. Freq - 1812 ; Temp 65c ; 60fps, Afterburner: 1905MHz@850mV / Port Royal Score CRASH, Afterburner: 1965MHz@850mV / Port Royal Score CRASH, Afterburner: 1845MHz@850mV / PR Scr 13,042 / Avg. the. For example in something old like heaven (what optimum tech tested with) I could do 1920mhz on 0.85v and be "stable" all day. See my photo for benchmark result: Aha that might be it, then. The problem is the stock vbios don't let you go that high, I mining at 2000 is fine. RTX 3080 overclock and undervolt for mining + 132MH/s on a Single 3090 I would describe my cooling as relatively good. Actually so much, that I had to increase the powerslider in Afterburner, to keep the 1815MHz from my undervolt. What I saw betterundervolt results had the guys from end 2020 and batches from March and later were cards with lower silicon quality in most cases, just luck I know. RTX 3080/3090 Ampere Undervolting Results - GPUs - Whirlpool.net.au Actually its quite good temps for this type of card. The reason I cant run 2010 on 900mv very long. Does MSI gaming trio has better memory cooling? But 1800MHz@875mV is stable. 95K views 1 year ago Undervolting Easy Tutorial Guide RTX 3080 TI/3080/3090.Same Performance Less Heat is what this will deliver for you! Picture is from Optimum Techs video on YouTube. But when it comes to Ethereum mining, temperatures go to a whole other level: When mining on both the RTX 3080 and RTX 3090, we found that the . Each card. But wauw. This shows you the clock frequency at various voltages. 3080 (sorry) but currently happily chugs along at 1830mhz@806mv all day every day. Join millions of miners worldwide at www.nicehash.com Everything crypto in one place. You need to be a member in order to leave a comment. First time I. Other mags like HardwareLuxx and Computerbase have already tested this. What about mem clock? Free Shipping for Loyal Forum Members - CLICK HERE, https://www.youtube.com/watch?v=TOkAcr01ZTw, Officially least sunny location -Ronskistats. So at a higher RPM, the GPU is a bit hotter than your Strix, but the RAM is considerably cooler (real gaming could push things higher, specially if I need to bump the voltage for stability). Ive tried everything I can and you mentioned, and not had any issues (touch wood). If you look at recent generations the card with the highest OC'd cores / memory is rarely the one with the highest fps. Freq - 1785 ; Temp 63c ; 58.5fps, Afterburner: 1830MHz@825mV / PR Score CRASH, Afterburner: 1800MHz@831mV / PR Scr 12,806 / Avg. So my settings was 1815MHz @850mV, with 137% powerlimit. The RTX 3090 Ti hashrate is 135 MH/s on the Dagger Hashimoto-based miner. 850mV is pretty good, IIRC that should save you about 80watt. 2 Likes. Started 40 minutes ago Running a card at a higher clock speed might mean a bit more performance but it also usually means higher temperature that needs to be removed = fans work harder = higher noise level and it also usually means the card needs more power. I ran the heaven benchmark through a few times giving the card a run to warm up before recording hardware information. I have no clue how mining affects graphics cards. 1905 , 850mV 64c. It was an extra 150pounds aswell as the cards having all gone up in price. My ROG STRIX does have two BIOS's, so I can mess one up, without any trouble at all, but it still sounds really scary haha. The memory also gets +650Mhz as in the gigabyte, we leave some room for the maximum overclocking value to preserve the components. I dont want fans at 100% and memory junction temperature 104 or lower is a must. Maybe all FE are binned. I undervolt my 3080 to 0.9V at 1920MHz. Under the test, with my previous undervolt setting, that used 100% (stock) on the powerslider, my GPU clock dropped from the 1815MHz to 1750-ish MHz, because maximum power was hit (the 100%). Still though. Built with enhanced RT Cores and Tensor Cores, new streaming multiprocessors, and superfast GDDR6X memory, the ZOTAC GAMING GeForce RTX 3090 Trinity OC gives rise to the amplified gaming experience with ultra graphics fidelity. Linus Media Group is not associated with these services. It seems your FTW3 holds a higher clockspeed out of the box and with less power usage than my ROG STRIX Thanks. 1) Default: PT 100% -> avg FPS 73 - max watt: 356.2 2) Default: PT 107% -> avg FPS 74 - max watt: 384.0 3) 0.850v@1830 MHz PT 107% -> avg FPS 73 - max watt: 320.5 4) 0.875v@1905 MHz PT 107% -> avg FPS 75 - max watt: 357.2 With Default, the card is slower coz it runs into PT and starts throttling. I sim race on f1 2022 - max settin- rt reflections on cars medium - avr. If my GPU was able to do that, I would use that setting. I've heard people get slightly better scores with custom 12pin cables and no adapter, I'm receiving a custom cable soon will check whether it makes a difference. Share Your 3090 FE Undervolting Curve : r/nvidia - Reddit Afterburner only lets me increase the power limit to 107%, I guess that's one benefit of having a STRIX over a TUF =]. I saw many people to change rtx 3090s 4x but gained silicon lottery on same volts 30-45mhz yeah notgood. Reset everything and then start by lowering the clock frequency about 250 -280 MHz. What if you instead could find a way to lower both the temperature and the power draw while still getting almost the same performance? Posted in General Discussion, By If I go below 1800 the hash rate will drop a lot so it is kind strange. Also the load peaks with such settings are quite unattractive. It may not display this or other websites correctly. Create an account to follow your favorite communities and start taking part in conversations. My old CPU was 4790K. Fan speed is set to 74, 1583rpm for all benchmarks. I got a tuf 3090 over here. Did you OC it? Computer nerd since 1983, audio freak since 1979 and pretty much open to anything with a plug or battery for over 50 years. At 2200RPM I can hear my 3090 but it really isn't loud at all. Max temperature during port royal stress test 69C (air conditioned room, 20C ambient) Peak power consumption: 289 watts, average is just over 280 watts with Power target capped at 94, this is to help stability due to the low voltage. Posted in New Builds and Planning, By I didn't think this was possible. Posted in Networking, By For this purpose I overclocked the gigabyte in performance mode by +100Mhz offset on the core and +650Mhz on the memory and this with simultaneous lowering of the power limit by 10%, which results in ~ 333 watts at the gaming OC. I've found this awesome - and free - Ray Tracing benchmark, made by MARvizer. 110 MH/s and below 290W. I changed from the TUF OC to the STRIX OC. The 243w is only pcie and two 8pin, gpuz and furmarkcan't read the third 8pin. So we save almost 40 watts! overclocks and undervolts are rarely reproducible across the board. My card draws about 30-ish watt less than with stock settings. So the card runs constantly in every scenario with 1785Mhz at a maximum of 285Watt (rare applications like division 2 can even slightly exceed this). Thanks in advance! What I saw better undervolt results had the guys from end 2020 and batches from March and later were cards with lower silicon quality in most cases, just luck I know. There shouldnt be any risk for damage to your card but just be aware of any risk regardless how minor it is. Games crashes after a couple of minutes. Best I can ever get is 117 MH/s and a 5min average of 115.8 MH/s (daggerhashimoto), 3090 FEMSI AfterburnerPower Limit: 85% - any lower and I lose hashCore clock: +50Memory Clock: +1350, at 1400 will start seeing rejected sharesFan speed 50%temp: steady 52cGPU: 52C 50% 297W (NH cmd window), Tried -50 and lost 5MH/s on average and started seeing rejections, I have MSI 3090 SUPRIM X Settings: Undervolt at .825 PL: 67 Memory - 200 Fan: 80 %, Hash rate 99 Mh/s Memory junction 102 - 104 degrees centigrade. You can see in this case, we achieve the 2040MHz goal at 1000mV, and don't need to go any further. My 3090 FE can do 1890MHz @850mV, I get 13400 in Port royal. How do you know? Posted in Troubleshooting, By Going back all the way to the 780, I remember finding the highest stable core and the highest stable memory and the highest fps i got was by backing down each maybe a third of they way back to "in da box' settings. . Alright so the reason why 1 HDMI port won't work is because the Kingpin card doesn't have this HDMI port? I expected the card to be power hungry at stock, and it was, by sucking up to 400W to achieve 1900MHz on Heaven. My 3090 can't do that, and it's a shame, because Optimum Tech reports his 3090 draws 71 watt less at 1800MHz using 806mV and that'spretty good. Any ideas to optimise this? williamcll [SOLVED] - 3090 and crashing | Tom's Hardware Forum Final Edit - I think I found my personal sweet spot. Silent Base 600 - Window / HP Pavilion, Panasonic SA-PMX94 / Realtek onboard + B&O speaker system / Harman Kardon Go + Play / Logitech G533, Seasonic Focus Plus Gold 750W / Powerbrick, Logitech MX Anywhere 2 Laser wireless / Logitech M330 wireless, RAPOO E9270P Black 5GHz wireless / HP backlit, Cinebench R23 (Single Core) 1936 @ stock Mining monitoring and management software for your Windows GPU rigs. But 99.9% sure you won't be gaming or doing stresstest @2000MHz with only 0.7mV on the core. I haven't actually played around with my card when it comes to overclocking. Bonesareawesome Happy for you!! Runs well at max 1910-1920 with gpu boost doing it's thing. Temps with fan ramped up usually get into mid 60's but haven't seen anything in the 70's yet, but it's winter here in Cali. - Less heat - Less fan RPM due to less heat, therefore less noise if that was a issue. Lets see if it works and we can beat the stock card! You are using an out of date browser. Testing RTX 3090 - Undervolting, Underclocking and Lowering GDDR6X Temps Humble Hardware with JimRPG 15.7K subscribers Subscribe 9.4K views 1 year ago Make sure to check Part 1 of this video (. I haven't tried overclocking the card, I just want good quiet performance A standard RTX 3090 Ti sports a thermal design power (TDP) of 450W, with some Nvidia board partners outfitting their custom RTX 3090 Ti models with a TDP exceeding 500W. Customs already on sale for under 800 USD or 849 Euro, Curved or flat: The Corsair Xeneon Flex 45WQHD240 OLED flexible gaming monitor Review High-end for rich enthusiasts, MSI Vigor GK71 Sonic Stylish mechanical keyboard with new Sonic Blue (clicky) switches, Alphacool Aurora Plexi GPX-N RTX 3090/3080 GPU Water Block Review How to turn 340 watts on a GeForce RTX 3080 into a frosty zone, NVIDIAs big memory party in December? Posted in CPUs, Motherboards, and Memory, By 2nd hand market can be a crapshoot sometimes. Also remember that just because we could undervolt our cards to a certain setting does not mean your card will work the same. So just relax , It is a long established fact that a reader will be distracted by the readable content of a page when lookin, Undervolting the RTX 3080 and the RTX3090, Transform your laptop into a Chromebook with Chrome OS Flex, The Steam Deck Valve delivers an excellent PC handheld. Increased performance. Undervolting and OVERCLOCKING RTX 3090/3080 - Guide (On ZOTAC Trinity RTX 3090) Ultra Gaming 25K views 2 years ago RTX 3090 Overclocked to over 2100 MHz - Shunt-Mod + Volt-Mod in Detail. The watts will still go up to 350. Keeping my fingers crossed. Geforce Now and the Apple Mac Book Pro (M1 Pro) a match made in heaven? I don't know the exact dB though since I have no way of measuring it. I know how to undervolt with MSI Afterburner blindly. I linked the full results in the original post if anyone is interested. My fan speed is 98-99. As you can see in my screenshot, my card settled at 1875MHz @1.069V, with 460 Watt peaks: So I just tried running Heaven with everything on Auto with the power limit cranked to the max. I did confirmed actual clockrates , not mhz setuped in MSI afterburner. 1920 @850mV sounds really good man! i9-11900K @ 5.1ghz;RTX 3090 FE@ 2ghz;ROG Maximus XIIHero; 4266mhz G.Skill 16GBDDR4; Honestly, no, I haven't tried lower than 1791MHz because I don't want to lose to much performance. My 3090 can't do that, and it's a shame, because Optimum Tech reports his 3090 draws 71 watt less at 1800MHz using 806mV and that'spretty good. For a few generations of GPUs now the GPUs have no longer been running with a set clockspeed instead boosting to a higher clockspeed that is partly determined by power target limit and temperatures. This Subreddit is community run and does not represent NVIDIA in any capacity unless specified. I dumped my Bios with nvflash Inno3D leaked the newest version, I ended up buying a 3090 Tuf in the end, I'm running it with -500Mhz downclock on the gpu, stock on the memory and still able to stream. You must log in or register to reply here. Ambient are usually so 24 degrees thanks to the amp cards in autumn. The bloody afterburner voltage adjustment was a bit of a pain, it has a mind if its own. I first run Bright Memory: Infinite Ray tracing for at least 30 minutes while logging the data via GPU-Z. I have no clue how mining affects graphics cards. I'd like to compare with my results. Undervolt your RTX 3090 for more FPS! - RTX 3000 Full Guide I know is not the best model however I am planning to install a waterblock in the future anyway so wasn't too interested in paying more for better air coolers/heat sink. Like I said (I'm not 100% on this) but anything over around 0.83 volts and the card will try and use the full 350 watts, on the FE anyway. When Heavenfreezes or crashes, I bump up the voltage a tiny bit, until Heaven doesn't freeze or crash. The setting is Rockstable. Freq - 1814 ; Temp 65 ; 59.3fps, Port royale is trash for stability check, port royal completes runs after time spy will crash in seconds, That's impressive you're hitting 13000 score with 1812mhz, since by default they go 1940+ but hits power limits. My 3090 is stable at 1815MHz with 850mV and the result is good - very, very quiet(low RPM) while gaming and after many hours my GPU will occasionally hit 67c but usually it sits at 65c. I am getting my 3090 Strix (November 2020 batch) and I can post my undervolt for comparison. Or that is how it used to be. Posted in CPUs, Motherboards, and Memory, By MSI GeForce RTX 3090 Ti SUPRIM X: Overclocking (OC) - TweakTown Rtx 3000 series undervolt discussion - [H]ard|Forum Then I adjust the voltage curve / undervolt until Heaven freezes or crashes. 2 Comments. After running the Port Royal Stress Test again, I need to lower to 1830 @ 850 mV so I guess I'm not too far off from your results. Powered by Invision Community. On 2/19/2021 at 4:45 AM, BetteBalterZen said: On 3/1/2021 at 1:34 AM, BetteBalterZen said: Pure RayTracing benchmark by MARvizer (itch.io), Upgrading from my very outdated gaming laptop. ASUS RTX 3090 ROG Strix 24 GB OC GPU in great condition with two years warranty left. Do NOT press control-L, instead just switch to the main MSI Afterburner window and press APPLY. The BFGPUs The GeForce RTX 3090 Ti and 3090 are powered by AmpereNVIDIA's 2nd gen RTX architecture. Is it important over the 97.5%? | Eine Publikation von igor'sLAB. I'd like to compare with my results. So while the Gigabyte RTX 3080 Eagle OC have a 1755 MHz Boost clock it actually often boosts even higher (Ive seen up to 1900 MHz). Tweaking the curve a bit brings it to 82-83C at a slower fan curve that I find comparable noise wise to the TUF's stock one. By increasing the powerslider to 137%, my 3090 was able to stay at 1815MHz at all times. I shouldn't have opened its box. Freq - 1845 ; Temp 65c ; 60.4fps, Afterburner: 1845MHz@850mV / PR Scr 13,042 / Avg. Core clock ( Locked) : 1300 Mhz Memory clock: +800 Mhz Power limit: 78% Temp limit: 65 C Fan Speed: 75% How to UnderVolt your GPU? Bonnouji In my case I got a average clocksped of 1805 MHz with spikes up towards 1860 Mhz. - Very theoretically extend the life of the card (less heat) My preferred settings on a 3080 Gigabyte Gaming OC - 875mV set to a upper curve of 1965Mhz (down from 2000Mhz ish in many games stock) I do, however, want to hit +99% in framerate stability. Connecting PCIe cables to GPU whilst PC is running ? We save here compared to the Gigabyte @Stock 85 watts and compared to the standard setting of the TUF 65 watts at least! I noticed the extra power connector on the strix version and decided to get that instead. Only tried maxing out the power slider. Do I need to test with max ray tracing on and off for stability? Wut, is that stable??? If the card can handle this, you can either increase the frequency a bit to get more out at the same voltage or you can choose to lower the voltage a step with the same frequency. RTX 2060 Overclock Settings | Crypto Mining - GamersWiz First time mining, undervolting, overclocking 3090 FE : r/NiceHash - Reddit using Nvidia advanced info statistics or other software ? For reference the CPU temperatures were sitting at around 50-60C. Underclocking an RTX 3090 Ti produces impressive results

Seattle News Zombie Woman, Next Plc Business Model 2020, Articles R